https://community.hpe.com/t5/disk-enclosures/bios-disabled-on-netraid-4m/m-p/3845977#M21377 Hi,<BR /><BR />I have recently installed a HP NetRAID-4M in a PC but when RAID card is booting I can't press <CTRL><A> to enter Configuration Utility.<BR /><BR />The exact message is :<BR />"Press <CTRL></CTRL></A><A> for Configuration Utility<BR />Press <CTRL><K> to Abort waiting for controller to Start<BR /><BR />Waiting for Array Controller #0 to start"<BR />(after few seconds)<BR />"Array Controller started<BR />Controller Monitor V2.4-2, Build 4632<BR />Controller Kernel V2.4-2, Build 4632<BR />Controller POST operation successful<BR />BIOS is disabled<BR /><BR />BIOS not installed!"<BR /><BR />When I press Ctrl+A nothing occurs but Ctrl+k is working. I have also tested Ctrl+Q because it's an AZERTY keyboard and of course the keyboard is working.<BR /><BR />I tried to plug or unplug hard drives but there is no difference.<BR />When I plug the hard drives the card detects it.<BR />I have also upgraded the BIOS with the last 2.4-2 version.<BR /><BR />I don't find how to clear the bios configuration to enable BIOS (with default value), if it's possible.<BR /><BR />The card is installed on an Asus A7N8X-E Deluxe MotherBoad, on a 32bit PCI slot. I have 4 SCSI hard drives at 15000 rpm with different IDs (0,1,2,3).<BR /><BR />Thanks for your help.<BR /><BR />Maxime</K></CTRL></A></CTRL> Fri, 18 Aug 2006 05:52:28 GMT Viargues Maxime 2006-08-18T05:52:28Z https://community.hpe.com/t5/disk-enclosures/bios-disabled-on-netraid-4m/m-p/3845977#M21377 Hi,<BR /><BR />I have recently installed a HP NetRAID-4M in a PC but when RAID card is booting I can't press <CTRL><A> to enter Configuration Utility.<BR /><BR />The exact message is :<BR />"Press <CTRL></CTRL></A><A> for Configuration Utility<BR />Press <CTRL><K> to Abort waiting for controller to Start<BR /><BR />Waiting for Array Controller #0 to start"<BR />(after few seconds)<BR />"Array Controller started<BR />Controller Monitor V2.4-2, Build 4632<BR />Controller Kernel V2.4-2, Build 4632<BR />Controller POST operation successful<BR />BIOS is disabled<BR /><BR />BIOS not installed!"<BR /><BR />When I press Ctrl+A nothing occurs but Ctrl+k is working. I have also tested Ctrl+Q because it's an AZERTY keyboard and of course the keyboard is working.<BR /><BR />I tried to plug or unplug hard drives but there is no difference.<BR />When I plug the hard drives the card detects it.<BR />I have also upgraded the BIOS with the last 2.4-2 version.<BR /><BR />I don't find how to clear the bios configuration to enable BIOS (with default value), if it's possible.<BR /><BR />The card is installed on an Asus A7N8X-E Deluxe MotherBoad, on a 32bit PCI slot. I have 4 SCSI hard drives at 15000 rpm with different IDs (0,1,2,3).<BR /><BR />Thanks for your help.<BR /><BR />Maxime</K></CTRL></A></CTRL> Fri, 18 Aug 2006 05:52:28 GMT https://community.hpe.com/t5/disk-enclosures/bios-disabled-on-netraid-4m/m-p/3845977#M21377 Viargues Maxime 2006-08-18T05:52:28Z https://community.hpe.com/t5/disk-enclosures/bios-disabled-on-netraid-4m/m-p/3845978#M21378 Im having the same problem in a K7D master's 64bit slot.<BR /> <BR />the last lines read... <BR />post sucsessfull -(after far longer than usual in the old board)-<BR />Press <CTRL><A> for Configuration Utility<BR />press ENTER to accept changes (iv tryed enter and return)<BR />defualt is enter after 30 seconds <BR /><BR />but nothing happend ctrl+alt+del do not restart the computer and all the keys are frozen.<BR />bios is build 4632<BR /></A></CTRL> Wed, 13 Sep 2006 11:27:38 GMT https://community.hpe.com/t5/disk-enclosures/bios-disabled-on-netraid-4m/m-p/3845978#M21378 Jack Forrester 2006-09-13T11:27:38Z