topic Port mapping /numbering in Disk Enclosures

Port mapping /numbering

symwin — Wed, 29 Nov 2006 01:35:31 GMT

How are front end and back end port of HP XP10000 numbered ? What is CU ?
How to connect a LUN through multiple paths ?

Is there any Procedure generator to simplify this ,like steps to create LUN, create RAID Groups ,storage groups ,connect to host etc?

Thanks in Advance....

Re: Port mapping /numbering

sivam — Wed, 31 Jan 2007 05:49:50 GMT

Hi Symwin

What your SAN Design Topology?

How do you want to be configured?

basically the CU are connected to the Director (Core Switch) which intend will be connected to the ISL to the Host. So let me know the topology you wanted.

The Chip ports are aejn
bfkp
cglq
dhmr

Once you provide I can send you the steps what you require.

Sivam

Re: Port mapping /numbering

avamar — Wed, 31 Jan 2007 05:55:51 GMT

Well my question is similar ..
If I have a HP XP array ,two Brocade 32 port switches and 6 servers ,each with 2 dual port HBA card ,how do I go about and configure them ..

I want each LUN to be accessed via atleast 2 paths.

Thanks ain advance..........