topic Gridmanager in Disk Enclosures

Gridmanager

Dan Bonham — Mon, 09 Jul 2001 14:39:37 GMT

I'm trying to use gridmanager on my console to change some parameters on my NIKE array. It's been about a year since I've done this and I can't remember exactly how to do it. It is on a K260.
I've attached the terminal cable from the array to my console and I've set my terminal to em100

What else do I need to do.

TIA
Rusty

Re: Gridmanager

Pedro Sousa — Mon, 09 Jul 2001 14:44:35 GMT

Hi Rusty,
It happenned to me once...
You can type "?".

good luck.

Re: Gridmanager

Dan Bonham — Mon, 09 Jul 2001 15:17:23 GMT

Sorry. no help. I can't seem to start gridmanager. I'm fairly certain that I have my terminal set correctly but ALL I get is a blank white screen.

Re: Gridmanager

Pedro Sousa — Mon, 09 Jul 2001 15:44:28 GMT

... very strange.
Did you save the terminal config when you changed to EM100?
Can you try to connect to the other SP?

Re: Gridmanager

Tony Chiu — Tue, 10 Jul 2001 02:36:15 GMT

Hi,

1. Connect SPA/SPB to console serial port 2
2. In terminal config, select COM2 and terminal type EM100.
3. type ^L to refresh the screen.

Hopefully you will see the Presentation Utility.
-Tony.