https://community.hpe.com/t5/disk-enclosures/expanding-array/m-p/2552856#M2281 Casper,<BR /><BR />This isn't a known error. I'd like to check to make sure that the firmware on your array controller is up to date. If you have a 431 array controller, the latest firmware is 1.18. For the Integrated array controller, it is version 1.44. If your controller needs to be updated, please download and apply SP16371 from <A href="http://www.compaq.com." target="_blank">www.compaq.com.</A><BR /><BR />Have a nice day, Tue, 17 Jul 2001 23:00:00 GMT Ayman Altounji 2001-07-17T23:00:00Z https://community.hpe.com/t5/disk-enclosures/expanding-array/m-p/2552855#M2280 We have one array with 1 logical drive with 3 harddisk's. we tried to add another harddisk to this array. Everything looked fine, we created a second logical drive. But when we booted the server we had the choice :<F1> to continue with logical drive disabled. <F2> to accept data loss and to enable the logical drives. <BR />This resulted in an corrupt logical drive and we had to restore the whole server. <BR /> <BR />Is this an known error and how can we prevent this from happening again?? <BR /> <BR />Thanks <BR />Casper</F2></F1> Sun, 15 Jul 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/expanding-array/m-p/2552855#M2280 Ayman Altounji 2001-07-15T23:00:00Z https://community.hpe.com/t5/disk-enclosures/expanding-array/m-p/2552856#M2281 Casper,<BR /><BR />This isn't a known error. I'd like to check to make sure that the firmware on your array controller is up to date. If you have a 431 array controller, the latest firmware is 1.18. For the Integrated array controller, it is version 1.44. If your controller needs to be updated, please download and apply SP16371 from <A href="http://www.compaq.com." target="_blank">www.compaq.com.</A><BR /><BR />Have a nice day, Tue, 17 Jul 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/expanding-array/m-p/2552856#M2281 Ayman Altounji 2001-07-17T23:00:00Z