https://community.hpe.com/t5/disk-enclosures/emc-powerpath-amp-srdf-problem-how-to-change-fc-timeout/m-p/2446194#M229 You can extend timeout value for each physical volume with pvchange command.<BR />Please refer to man page, pvchange(1m).<BR /><BR /># pvchange -t <VALUE> <DEVICE file=""><BR /><BR />--- I hope that you wrote about this.</DEVICE></VALUE> Tue, 19 Sep 2000 09:35:05 GMT Insu Kim 2000-09-19T09:35:05Z https://community.hpe.com/t5/disk-enclosures/emc-powerpath-amp-srdf-problem-how-to-change-fc-timeout/m-p/2446193#M228 Hi there<BR /><BR />When using EMC PowerPath and a couple of EMC Symmetrix in synchronous<BR />SRDF mode, I encounter a regular loss of PowerPath channels to my HP 9000.<BR />If in SRDF adaptive copy mode, ther are no problems at all. <BR /><BR />Is it possible to extend timeout periods on A3404 / A5158A FC (FCP) drivers ?<BR /><BR />Thanks for any help<BR /><BR />Cheers<BR /><BR />Orlando Tue, 19 Sep 2000 06:11:29 GMT https://community.hpe.com/t5/disk-enclosures/emc-powerpath-amp-srdf-problem-how-to-change-fc-timeout/m-p/2446193#M228 O. Cantieni 2000-09-19T06:11:29Z https://community.hpe.com/t5/disk-enclosures/emc-powerpath-amp-srdf-problem-how-to-change-fc-timeout/m-p/2446194#M229 You can extend timeout value for each physical volume with pvchange command.<BR />Please refer to man page, pvchange(1m).<BR /><BR /># pvchange -t <VALUE> <DEVICE file=""><BR /><BR />--- I hope that you wrote about this.</DEVICE></VALUE> Tue, 19 Sep 2000 09:35:05 GMT https://community.hpe.com/t5/disk-enclosures/emc-powerpath-amp-srdf-problem-how-to-change-fc-timeout/m-p/2446194#M229 Insu Kim 2000-09-19T09:35:05Z