https://community.hpe.com/t5/disk-enclosures/wrong-firmware-on-disk-when-installing-netraid-1m/m-p/2552943#M2293 Yes, you can definately upgrade the drive firmware yourself. HP has a very cool tool to help you identify and automatically update drive firmware.<BR /><BR />Visit <BR /><BR /><A href="http://www.hp.com/cposupport/swindexes/hpfirmware19319_swen.html" target="_blank">http://www.hp.com/cposupport/swindexes/hpfirmware19319_swen.html</A><BR /><BR />and download the Hard Disk Drive Firmware Tool (at the bottom of the page in the UTILITY section), then the catalog file for AMI/Adaptec (top of the page in the CATALOG FILE section), and finally, all the applicable firmware images (for example, the BX03 you mentioned, plus any others that might be useful for this or other systems).<BR /><BR />I download all the files, extract them, and write them out to a CDR for easy access.<BR /><BR />Cheers! Tue, 17 Jul 2001 17:14:38 GMT Mark Medici 2001-07-17T17:14:38Z https://community.hpe.com/t5/disk-enclosures/wrong-firmware-on-disk-when-installing-netraid-1m/m-p/2552942#M2292 I'm trying to install a RAID system with two 9.1 GB HP scsi disks.<BR />The firmware on the disks are BX02 but it needs to be atleast BX03 according to the paper that was attached to the NetRaid 1M.<BR /><BR />Is it possible to upgrade the disks by downloading a new firmware or do I have to send the disks to HP? Mon, 16 Jul 2001 08:46:17 GMT https://community.hpe.com/t5/disk-enclosures/wrong-firmware-on-disk-when-installing-netraid-1m/m-p/2552942#M2292 Henrik Algestam 2001-07-16T08:46:17Z https://community.hpe.com/t5/disk-enclosures/wrong-firmware-on-disk-when-installing-netraid-1m/m-p/2552943#M2293 Yes, you can definately upgrade the drive firmware yourself. HP has a very cool tool to help you identify and automatically update drive firmware.<BR /><BR />Visit <BR /><BR /><A href="http://www.hp.com/cposupport/swindexes/hpfirmware19319_swen.html" target="_blank">http://www.hp.com/cposupport/swindexes/hpfirmware19319_swen.html</A><BR /><BR />and download the Hard Disk Drive Firmware Tool (at the bottom of the page in the UTILITY section), then the catalog file for AMI/Adaptec (top of the page in the CATALOG FILE section), and finally, all the applicable firmware images (for example, the BX03 you mentioned, plus any others that might be useful for this or other systems).<BR /><BR />I download all the files, extract them, and write them out to a CDR for easy access.<BR /><BR />Cheers! Tue, 17 Jul 2001 17:14:38 GMT https://community.hpe.com/t5/disk-enclosures/wrong-firmware-on-disk-when-installing-netraid-1m/m-p/2552943#M2293 Mark Medici 2001-07-17T17:14:38Z