https://community.hpe.com/t5/disk-enclosures/msa1000-false-disk-failures/m-p/3945896#M22938 I have an MSA1000 connected thru FC to an HP-UX 11i N-class. It has fw v4.48.B342 and EMU v1.86. Its got 8 of 146.8G disks. <BR /><BR />Our problems is that once in about 2 months or so the disks claim to be dead with orange lights. But once you pull the disk out and let it spin down for a while, on inserting the drive again, it starts rebuilding and everything getting back to normal. The has been going on for almost a year and only once was it a true disk failure compared to 4 of the hoax failures. Functionaly everything else is OK.<BR /><BR />Does anyone know on where to check or what could be wrong? Fri, 16 Feb 2007 02:55:58 GMT otukile 2007-02-16T02:55:58Z https://community.hpe.com/t5/disk-enclosures/msa1000-false-disk-failures/m-p/3945896#M22938 I have an MSA1000 connected thru FC to an HP-UX 11i N-class. It has fw v4.48.B342 and EMU v1.86. Its got 8 of 146.8G disks. <BR /><BR />Our problems is that once in about 2 months or so the disks claim to be dead with orange lights. But once you pull the disk out and let it spin down for a while, on inserting the drive again, it starts rebuilding and everything getting back to normal. The has been going on for almost a year and only once was it a true disk failure compared to 4 of the hoax failures. Functionaly everything else is OK.<BR /><BR />Does anyone know on where to check or what could be wrong? Fri, 16 Feb 2007 02:55:58 GMT https://community.hpe.com/t5/disk-enclosures/msa1000-false-disk-failures/m-p/3945896#M22938 otukile 2007-02-16T02:55:58Z