https://community.hpe.com/t5/disk-enclosures/msa1500-amp-cli-amp-adding-new-connections/m-p/3967244#M23219 If I cable up a new host to the MSA (after zoning on the switch), will the MSA 'see' the new connection or do I have to reboot the MSA in order for it to pick it up. I only have CLI (not ACU-CLI) access to the MSA and the user guide is ambigious on whether the connection will show up automatically or if I need to reboot. Thu, 22 Mar 2007 13:10:03 GMT Brantley Fry 2007-03-22T13:10:03Z https://community.hpe.com/t5/disk-enclosures/msa1500-amp-cli-amp-adding-new-connections/m-p/3967244#M23219 If I cable up a new host to the MSA (after zoning on the switch), will the MSA 'see' the new connection or do I have to reboot the MSA in order for it to pick it up. I only have CLI (not ACU-CLI) access to the MSA and the user guide is ambigious on whether the connection will show up automatically or if I need to reboot. Thu, 22 Mar 2007 13:10:03 GMT https://community.hpe.com/t5/disk-enclosures/msa1500-amp-cli-amp-adding-new-connections/m-p/3967244#M23219 Brantley Fry 2007-03-22T13:10:03Z https://community.hpe.com/t5/disk-enclosures/msa1500-amp-cli-amp-adding-new-connections/m-p/3967245#M23220 The MSA should automatically see the new host. You will need to set the OS Type on the connection before the host can see any logical drives, depending on the firmware of th MSA.<BR /><BR /><BR />Steven Thu, 22 Mar 2007 14:04:01 GMT https://community.hpe.com/t5/disk-enclosures/msa1500-amp-cli-amp-adding-new-connections/m-p/3967245#M23220 Steven Clementi 2007-03-22T14:04:01Z