https://community.hpe.com/t5/disk-enclosures/install-msa30/m-p/3970368#M23260 Is there anyone who can help (or assist) me?<BR /><BR />I have problem with my provider and I need do this only I.<BR />I NEED HELP, I am not adminsitrator and I need re install the MSA30 on server, I spoke with Torsten and he send me an action plan, to continue I display this.<BR />I need send me the sentence and command for to do the change on server, Pls excuseme my english, this is poor.<BR /><BR /><BR />This is the action plan that you send me.<BR /><BR />- reconfigure 1 HBA(#2) to initiator ID 6<BR />(using mptutil)<BR /><BR />- connect each bus with 2 cables to your host (better to shut the host down for this)<BR />e.g.<BR />HBA1 connector1 -&gt; A1 : A2 HBA2 connector1<BR />HBA1 connector2 -&gt; B1 : B2 HBA2 connector2<BR /><BR />- now you have 2 device files for each disk<BR /><BR />- remove the LVM mirror for each LVOL in this VG<BR /><BR />- remove the device files for the (empty) disks to be re-located<BR /><BR />- re-locate the (empty) disks to the other bus<BR /><BR />- create device files<BR /><BR />- include the disks to the VG<BR /><BR />-include the alternate pathes to the VG<BR /><BR />- mirror the lvols<BR /><BR />Thanks very much, for all.<BR />Fabian Tue, 27 Mar 2007 13:36:36 GMT Fabian Crea 2007-03-27T13:36:36Z https://community.hpe.com/t5/disk-enclosures/install-msa30/m-p/3970368#M23260 Is there anyone who can help (or assist) me?<BR /><BR />I have problem with my provider and I need do this only I.<BR />I NEED HELP, I am not adminsitrator and I need re install the MSA30 on server, I spoke with Torsten and he send me an action plan, to continue I display this.<BR />I need send me the sentence and command for to do the change on server, Pls excuseme my english, this is poor.<BR /><BR /><BR />This is the action plan that you send me.<BR /><BR />- reconfigure 1 HBA(#2) to initiator ID 6<BR />(using mptutil)<BR /><BR />- connect each bus with 2 cables to your host (better to shut the host down for this)<BR />e.g.<BR />HBA1 connector1 -&gt; A1 : A2 HBA2 connector1<BR />HBA1 connector2 -&gt; B1 : B2 HBA2 connector2<BR /><BR />- now you have 2 device files for each disk<BR /><BR />- remove the LVM mirror for each LVOL in this VG<BR /><BR />- remove the device files for the (empty) disks to be re-located<BR /><BR />- re-locate the (empty) disks to the other bus<BR /><BR />- create device files<BR /><BR />- include the disks to the VG<BR /><BR />-include the alternate pathes to the VG<BR /><BR />- mirror the lvols<BR /><BR />Thanks very much, for all.<BR />Fabian Tue, 27 Mar 2007 13:36:36 GMT https://community.hpe.com/t5/disk-enclosures/install-msa30/m-p/3970368#M23260 Fabian Crea 2007-03-27T13:36:36Z