https://community.hpe.com/t5/disk-enclosures/hp-netraid-1m-problem/m-p/3975112#M23347 Ouch. What exactly happened to cause the RAID to "fail"? That is, how did you know and what were the indications?<BR />Were there lights on the drives blinking?<BR />Did you loose the ability to read the logical drives on the RAID?<BR />Without knowing it sounds as if 1 drive failed and then another after that. Thu, 05 Apr 2007 09:35:03 GMT e4services 2007-04-05T09:35:03Z https://community.hpe.com/t5/disk-enclosures/hp-netraid-1m-problem/m-p/3975111#M23346 we have HP NetRaid -1M with 4 hardisks<BR />the raid fails and we tried to rebuild the raid and it done successfully, but we can't see the data.<BR />we added separate hardisk to the same server and we see the raid but the data seems to be currupted.<BR />is there is any way or utility to restore the data Wed, 04 Apr 2007 05:53:21 GMT https://community.hpe.com/t5/disk-enclosures/hp-netraid-1m-problem/m-p/3975111#M23346 Abed Barakat 2007-04-04T05:53:21Z https://community.hpe.com/t5/disk-enclosures/hp-netraid-1m-problem/m-p/3975112#M23347 Ouch. What exactly happened to cause the RAID to "fail"? That is, how did you know and what were the indications?<BR />Were there lights on the drives blinking?<BR />Did you loose the ability to read the logical drives on the RAID?<BR />Without knowing it sounds as if 1 drive failed and then another after that. Thu, 05 Apr 2007 09:35:03 GMT https://community.hpe.com/t5/disk-enclosures/hp-netraid-1m-problem/m-p/3975112#M23347 e4services 2007-04-05T09:35:03Z