https://community.hpe.com/t5/disk-enclosures/eva-upgrade/m-p/3990319#M23635 Hi:<BR /><BR />Some body was made a upgrade to the eva 2c4d from a 2c2d, ?<BR />put with off the cables connection, what about firmware o i need other software adicional to made this upgrade ?<BR /><BR />The eva only going to see additional free space !<BR /><BR />thanks for clarify mind<BR /><BR /><BR /> Fri, 27 Apr 2007 17:35:03 GMT Isaac_4 2007-04-27T17:35:03Z https://community.hpe.com/t5/disk-enclosures/eva-upgrade/m-p/3990319#M23635 Hi:<BR /><BR />Some body was made a upgrade to the eva 2c4d from a 2c2d, ?<BR />put with off the cables connection, what about firmware o i need other software adicional to made this upgrade ?<BR /><BR />The eva only going to see additional free space !<BR /><BR />thanks for clarify mind<BR /><BR /><BR /> Fri, 27 Apr 2007 17:35:03 GMT https://community.hpe.com/t5/disk-enclosures/eva-upgrade/m-p/3990319#M23635 Isaac_4 2007-04-27T17:35:03Z https://community.hpe.com/t5/disk-enclosures/eva-upgrade/m-p/3990320#M23636 Technicly all you have to do is add the 2 new disk shelf to the array (the upgrade process is a little more complex) but the Firmware level or software does not have any effect on an existing and running EVA.<BR /><BR />I would recomand to keep an updates Firmware and current command view EVA after the upgrade is done.<BR /><BR />Tal Sat, 28 Apr 2007 21:17:49 GMT https://community.hpe.com/t5/disk-enclosures/eva-upgrade/m-p/3990320#M23636 goldboy 2007-04-28T21:17:49Z