topic I2c error on MSA 1000 in Disk Enclosures

I2c error on MSA 1000

Khurram Shahzad — Mon, 30 Apr 2007 00:50:59 GMT

Hi we have a MSA 1000, it is working fine with no problems. But it displays an error message on Controller LCD " I2C Read Failure". The message reamins there even after reading it. Kindly guide me how to resolve this issue.

Re: I2c error on MSA 1000

Uwe Zessin — Mon, 30 Apr 2007 01:03:18 GMT

You can delete a message from the OPC by pressing the left and right buttons at the same time.

Re: I2c error on MSA 1000

Prabhulj — Mon, 30 Apr 2007 06:49:13 GMT

Hi Khurram,

Please check one of my replies regarding the same.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1122691

Regards,
Prabhu

Re: I2c error on MSA 1000

Khurram Shahzad — Tue, 01 May 2007 23:23:13 GMT

I have tried to delete the message by pressing the left and right navigation button on OCP but it doesn't work either. What should I do now.