https://community.hpe.com/t5/disk-enclosures/rom-failure/m-p/2558355#M2396 I have fixed the issue!!! I had to take the batteries out of the array accelerator, that had cleared all config. data and it was OK. This seems to be an issue!!! Hint. Sun, 05 Aug 2001 23:00:00 GMT Ayman Altounji 2001-08-05T23:00:00Z https://community.hpe.com/t5/disk-enclosures/rom-failure/m-p/2558353#M2394 I have a 5300/32 controller that had failed a rom flash ( FLash Unsuccessfull BH) and I am not able to reflash I keep getting the same error. Rom was 1.28 trying to go to 1.72 Sun, 29 Jul 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/rom-failure/m-p/2558353#M2394 Ayman Altounji 2001-07-29T23:00:00Z https://community.hpe.com/t5/disk-enclosures/rom-failure/m-p/2558354#M2395 Is the controller still recognized on POST? If not, then you'll need to replace the controller. If the controller is POSTing fine, they try the latest rompaq of SP16371.exe which will include rom revision 1.74. <BR /><BR />Have a nice day,<BR /><BR />Mike Tue, 31 Jul 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/rom-failure/m-p/2558354#M2395 Ayman Altounji 2001-07-31T23:00:00Z https://community.hpe.com/t5/disk-enclosures/rom-failure/m-p/2558355#M2396 I have fixed the issue!!! I had to take the batteries out of the array accelerator, that had cleared all config. data and it was OK. This seems to be an issue!!! Hint. Sun, 05 Aug 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/rom-failure/m-p/2558355#M2396 Ayman Altounji 2001-08-05T23:00:00Z