topic EVA Controllers in Disk Enclosures

EVA Controllers

Feljav — Mon, 09 Jul 2007 10:02:55 GMT

In the Operator Control Panel (OCP), what is the function of the systmen information sub item:
UUID Unique Half,
Debug Flags,
Print Flags?

Re: EVA Controllers

Uwe Zessin — Mon, 09 Jul 2007 12:29:40 GMT

Some of them are for special diagnostic functions done by trained service personal. Please don't touch them! You can set up a condition where the EVA does not boot any longer.

Re: EVA Controllers

tkc — Fri, 20 Jul 2007 01:11:16 GMT

UUID Unique half ==> Display the unique half of the controller UUID. Controller A and B UUIDs are displayed in Command View EVA on the Controller Properties page.
(Hardware > Rack > Controller Enclosure > Controller A or Controller B).

Debug flags ==> View and set debug flags. This option is set during troubleshooting with the experts. You don't normally do anything with it during normal operation.

Print flags ==> View and set several print flags. This option is also set during troubleshooting with the experts to allow printing output to the screen of the terminal display connected the serial port of the EVA controller.

Hope the info helps.