topic Re: OBDR in Disk Enclosures

OBDR

DELEUZE — Fri, 03 Aug 2001 14:15:22 GMT

I try to use the OBDR (hp tape + Arcser 2000, DR)
the manipulation :
- generated the bootable tape
- did a full backup
- switch off
- switch on the server when pressing 5 secondes the tape drive button
- insert the tape
- follow the instruction of nt installtion
- i've got a message that it couldn't restore the "yes." file ???
- the reboot the server
- the server reboot and block on a black screen
- the floppy ligt is on ( without floppy)
- and the server is blocked.
i don't know what can i do ?

Re: OBDR

David Navarro — Mon, 06 Aug 2001 07:13:22 GMT

Hi,
Which server, HBA and FW version did you have?
Check it at this address http://www.products.storage.hp.com/eprise/main/new_compatibility/index.htm

Re: OBDR

DELEUZE — Tue, 07 Aug 2001 06:10:01 GMT

This URL doesn't work

Re: OBDR

David Navarro — Tue, 07 Aug 2001 07:06:42 GMT

OK Yesterday was down several hours, try it now.

Re: OBDR

DELEUZE — Tue, 07 Aug 2001 09:00:40 GMT

Thanks a lot
I was trying to do this on a LH4 with DAT24I but this configuration is not supported.