topic Re: EVA 4000 with Windows 2003 Server in Disk Enclosures

EVA 4000 with Windows 2003 Server

Gustavo Souza Lima — Mon, 20 Aug 2007 07:03:08 GMT

Hi,

I have a Storage EVA 4000 installed on Windows 2000 Server and on this weekend I needed to update my Windows 2000 to 2003 because of memory. So far everything was Okay, but when I tried to install the EVA softwares (Command View EVA, Command View EVAPerf) I can't find the LUN's that there were before. I have tried to update the HBA driver but nothing happened.

HBA - QLA2340
Server - DL385 G4
SO - Windows 2003 Server Standard

Help..

Re: EVA 4000 with Windows 2003 Server

Luk Vandenbussche — Mon, 20 Aug 2007 07:16:55 GMT

Have you also installed the latest fiber channel drivers for you QLA2340 for W2K3.

Do you see you eva4000 in Commandview EVA

Re: EVA 4000 with Windows 2003 Server

Gustavo Souza Lima — Mon, 20 Aug 2007 07:49:01 GMT

I installed the last HBA driver for W2k3.

And I can't open Commando View EVA...

I open the browser and type https://localhost:2372 and nothing happened..

Re: EVA 4000 with Windows 2003 Server

Luk Vandenbussche — Mon, 20 Aug 2007 07:51:50 GMT

Which version of commandview are you running?
Did you restart the commandview service yet?

Re: EVA 4000 with Windows 2003 Server

Gustavo Souza Lima — Mon, 20 Aug 2007 08:06:37 GMT

Commando View 5

I restarted the server...

Re: EVA 4000 with Windows 2003 Server

Luk Vandenbussche — Mon, 20 Aug 2007 08:11:58 GMT

Check the matrix to see if all the prerequisites are met

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01080781/c01080781.pdf

You can find an upgrade to V6 here

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3185481&prodTypeId=12169&prodSeriesId=471497&swLang=13&taskId=135&swEnvOID=1005

Check also is your W2K3 server is activated on the sanswitch

Ps : don't forget to submit points

Re: EVA 4000 with Windows 2003 Server

Rob Leadbeater — Mon, 20 Aug 2007 08:21:45 GMT

Hi,

If you're using CommandView EVA 5, then the URL should be:

https://localhost:2381/command_view_eva

The URL you mentioned with port 2372 is for CV EVA 6.

Hope this helps,

Regards,

Rob

Re: EVA 4000 with Windows 2003 Server

Gustavo Souza Lima — Mon, 20 Aug 2007 08:47:23 GMT

Okay .... I will try and then I'll give your points....

Re: EVA 4000 with Windows 2003 Server

Gustavo Souza Lima — Wed, 22 Aug 2007 08:12:32 GMT

Hello, I can solve the problem.

It was so stupid, I turned off the server and the Storage and then I turned on first the Storage and wait for syncronization and then I turned on the server.

Thanks for the help..