https://community.hpe.com/t5/disk-enclosures/problem-with-msa1000/m-p/4071865#M24871 Cluster system based on:<BR />1. MSA 1000 (2xRAID, 2xFC-hubs, 1xDisk Shelf, firmware ver. 5.20)<BR />2. 2xDL360 G4 (2xFC PCI controllers per server)<BR />3. RHEL 3 AS TU3<BR />4. SecurePath 3.0C for Linux + SP2<BR />5. HP ServiceGuard for Linux 11.16<BR /><BR />At connection MSA to servers through two hub (second for redundancy), at boot there is a message "No volume group", and the disk array is not connected. At switching-off of one of hubs (any) boot passes normally. In what there can be a problem?<BR /> Tue, 18 Sep 2007 01:47:06 GMT ALex Garin_2 2007-09-18T01:47:06Z https://community.hpe.com/t5/disk-enclosures/problem-with-msa1000/m-p/4071865#M24871 Cluster system based on:<BR />1. MSA 1000 (2xRAID, 2xFC-hubs, 1xDisk Shelf, firmware ver. 5.20)<BR />2. 2xDL360 G4 (2xFC PCI controllers per server)<BR />3. RHEL 3 AS TU3<BR />4. SecurePath 3.0C for Linux + SP2<BR />5. HP ServiceGuard for Linux 11.16<BR /><BR />At connection MSA to servers through two hub (second for redundancy), at boot there is a message "No volume group", and the disk array is not connected. At switching-off of one of hubs (any) boot passes normally. In what there can be a problem?<BR /> Tue, 18 Sep 2007 01:47:06 GMT https://community.hpe.com/t5/disk-enclosures/problem-with-msa1000/m-p/4071865#M24871 ALex Garin_2 2007-09-18T01:47:06Z