topic Re: Command to check BCV configurations in Disk Enclosures

Command to check BCV configurations

manoj_pu — Wed, 14 Nov 2007 12:46:45 GMT

Hi All,

We have hp-ux 11i servers connected with xp256 disk arrays. BCVs and CA is configured for the data volume backup.

I am new to this kind of setup. I want to know how BCVs are configured between hp systems.

Is there any command to check this configuration?
Could any one help on this?

Thanks & regards
Manoj

Re: Command to check BCV configurations

Ivan Ferreira — Wed, 14 Nov 2007 13:15:43 GMT

Go to the XP documentation page. You can use the WEB GUI or the CCI to display configuration. To use CCI/CLI, you need to configure some files (horcmX.conf) in a host with access to a LUN enabled as "command device".

Then you can use pairdisplay, pairmon, raiscan, etc commands to get information about your configuration.