topic EVA VCS 4.x.x in Disk Enclosures

EVA VCS 4.x.x

Roy Cohen — Tue, 08 Jan 2008 12:31:47 GMT

Hi,

I am thnking of upgrading our VCS 3.110 to VCS 4.x.x in order to get Container support.

These are the questions i have:

1. What is the last stable version on VCS 4.x.x?
2. Why does the upgrade take 8 hours
3. Does powerpath (EMC) work with VCS 4.x.x as active active?
4. Can CA replication work between a VCS 3.110 and 4.x.x?

Thanks

Re: EVA VCS 4.x.x

Ivan Ferreira — Tue, 08 Jan 2008 12:59:23 GMT

For official information, please see this link:

http://h20000.www2.hp.com/bizsupport/site/search/r4_0/jsp/search.jsp?lang=en&cc=us&tx=Virtual%20VCS%20

>>> 2. Why does the upgrade take 8 hours

We did some EVA upgrades an none take more than 2 hours, even if multiple upgrades are required.

Re: EVA VCS 4.x.x

Víctor Cespón — Tue, 08 Jan 2008 18:47:47 GMT

1. What is the last stable version on VCS 4.x.x?
4.100. Announcenment here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01272397

2. Why does the upgrade take 8 hours
It does not. The firmware upgrade takes less than one hour, including the controllers reboot, disk firmware and EMU firmware upgrade.
Another thing is updating HBAs, switches and drivers on the servers, that can take days and must be done before updating the EVA.
Upgrading to VCS 4.100 from VCS 3.110 or earlier must be done offline (all host I/O halted).

3. Does powerpath (EMC) work with VCS 4.x.x as active active?
The multipathing software depends on the OS, but that's a EMC software and not supported by HP

4. Can CA replication work between a VCS 3.110 and 4.x.x?
Yes, but the performance of the replication will be as if both EVAs had VCS 3.110 (least common denominator)

Check also:
HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS 4.100)

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01278980/c01278980.pdf