topic Re: Unbind LUN in Disk Enclosures

Unbind LUN

james gould — Wed, 22 Aug 2001 12:23:15 GMT

Trying to unbind a LUN through SAM but am
unable to find the option. Can find the bind
option but no unbind.

Running on 11.0 hpux

Re: Unbind LUN

Bill McNAMARA_1 — Wed, 22 Aug 2001 12:26:26 GMT

what is the disk array.
AutoRaid should be in the actions field as with fc60..
But use command line..
amcfg -l (lunnumber) -d (serial number)
arraycfg -l (lunnumber -d (serial number)

Later,
Bill

Re: Unbind LUN

linuxfan — Wed, 22 Aug 2001 13:15:27 GMT

Hi James,

what kind of array are you using?
For autoraids(12H arrays), you can find the serial number of the array by issueing
arraydsp -i

arraydsp -i
(gives the configuration of the autoraid)

arraycfg -d -l
where is the lun you want to delete and is the serial num of the array

-HTH
Ramesh

Re: Unbind LUN

Andreas Voss — Wed, 22 Aug 2001 13:18:11 GMT

Hi,

is your LUN displayed als unused in SAM ?
Before unbinding a LUN you have to vgreduce the LUN from a volume group.

Regards

Re: Unbind LUN

james gould — Wed, 22 Aug 2001 16:49:07 GMT

Andreas was correct. The unbind will appear
once logical volume and volume group are
removed. Was able to highlight the LUN and
the unbind message appeared when in SAM.

Thanks