https://community.hpe.com/t5/disk-enclosures/securepath-3-0f-and-eva-5000/m-p/4129660#M25895 We've experienced two power failure incidents in the past several years, when one or more servers have had their power restored prior to our storage (3000's or 5000's) being up. We have noticed that when our HP-UX 11.23 servers come up prior to our EVA 3000's or 5000's, SecurePath seems to assign NEW virtual device names to the LUNS when the storage eventually comes up, causing a scrambling of all our device names associated with the various volume groups.<BR /><BR />Is there a simple configuration setting that might help us avoide this situation? Tue, 15 Jan 2008 16:04:12 GMT Janis Kendall 2008-01-15T16:04:12Z https://community.hpe.com/t5/disk-enclosures/securepath-3-0f-and-eva-5000/m-p/4129660#M25895 We've experienced two power failure incidents in the past several years, when one or more servers have had their power restored prior to our storage (3000's or 5000's) being up. We have noticed that when our HP-UX 11.23 servers come up prior to our EVA 3000's or 5000's, SecurePath seems to assign NEW virtual device names to the LUNS when the storage eventually comes up, causing a scrambling of all our device names associated with the various volume groups.<BR /><BR />Is there a simple configuration setting that might help us avoide this situation? Tue, 15 Jan 2008 16:04:12 GMT https://community.hpe.com/t5/disk-enclosures/securepath-3-0f-and-eva-5000/m-p/4129660#M25895 Janis Kendall 2008-01-15T16:04:12Z