https://community.hpe.com/t5/disk-enclosures/raid-migration/m-p/4131662#M25928 Hi,<BR /><BR />Be aware however, that if the priority setting* is set to low then the migration will only start if there's no disk access, which can give the impression that the migration has been running for ages.<BR /><BR />The BBWC module will also speed things up.<BR /><BR />Cheers,<BR /><BR />Rob<BR /><BR />* - I forget the exact name of the setting Sun, 20 Jan 2008 11:18:41 GMT Rob Leadbeater 2008-01-20T11:18:41Z https://community.hpe.com/t5/disk-enclosures/raid-migration/m-p/4131660#M25926 Can anyone tell me how long it would take to migrate a 2 disk raid 1 set to a 3 disk using 3 36.4Gb U320 SCSI HDD's. The server is a DL380 G3 using a 642 controller. How may Gb's per minute?<BR /><BR />Many thanks. Fri, 18 Jan 2008 11:12:04 GMT https://community.hpe.com/t5/disk-enclosures/raid-migration/m-p/4131660#M25926 System Management 2008-01-18T11:12:04Z https://community.hpe.com/t5/disk-enclosures/raid-migration/m-p/4131661#M25927 hi<BR /><BR />usually it takes 10-15 minutes per GB<BR /><BR />regards Sat, 19 Jan 2008 03:41:36 GMT https://community.hpe.com/t5/disk-enclosures/raid-migration/m-p/4131661#M25927 KarloChacon 2008-01-19T03:41:36Z https://community.hpe.com/t5/disk-enclosures/raid-migration/m-p/4131662#M25928 Hi,<BR /><BR />Be aware however, that if the priority setting* is set to low then the migration will only start if there's no disk access, which can give the impression that the migration has been running for ages.<BR /><BR />The BBWC module will also speed things up.<BR /><BR />Cheers,<BR /><BR />Rob<BR /><BR />* - I forget the exact name of the setting Sun, 20 Jan 2008 11:18:41 GMT https://community.hpe.com/t5/disk-enclosures/raid-migration/m-p/4131662#M25928 Rob Leadbeater 2008-01-20T11:18:41Z