topic Re: adding disk enclosures to EVA 4100 in Disk Enclosures

adding disk enclosures to EVA 4100

Kevin R Miller — Tue, 29 Jan 2008 21:15:19 GMT

Does anyone know if there is a document/manual with procedures for adding disk enclosures in an EVA 4100?

I found the below thread w/ a link to EXACTLY what I was looking for, but the link no longer works. (link to actual thread works, and is below)

http://forums11.itrc.hp.com/service/forums/questionanswer.do;HP-FORUMS-S-WPA-IDX=HRxS9dZ0v2SNF6DbpV41Q3LbFkN0DGgCfbNTyznMF4NLQSn466GH!619186450!809442776?threadId=1074819

Thanks in advance,
Kevin

Re: adding disk enclosures to EVA 4100

Rob Leadbeater — Tue, 29 Jan 2008 22:05:23 GMT

Hi Kevin,

Not exactly what you want, but the hardware configuration here:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01077571/c01077571.pdf

has details of all the relevant cabling etc.

Hope this helps,

Regards,

Rob

Re: adding disk enclosures to EVA 4100

Kevin R Miller — Tue, 29 Jan 2008 22:09:48 GMT

Thanks for the HW config guide but I was wondering if there are procedures available to add drive enclosures to an existing EVA.

Thanks again for your help!

Re: adding disk enclosures to EVA 4100

Rob Leadbeater — Tue, 29 Jan 2008 22:47:12 GMT

Hi Kevin,

The attached document should help. It's for the 4/6/8000 rather than a 4100, but the same procedure should apply.

Cheers,

Rob

Re: adding disk enclosures to EVA 4100

Kevin R Miller — Wed, 30 Jan 2008 13:30:14 GMT

Yes! This is exactly what I was looking for.

Thanks again,
Kevin