https://community.hpe.com/t5/disk-enclosures/smart-array-641/m-p/4138776#M26076 Hi all,<BR /><BR />Wondering if anyone can tell me if 300GB U320 drives are supported on the 641 (in a ML350 G3) and if so what pre-req's are needed ie firmware versions.<BR /><BR />Cheers<BR /> Fri, 01 Feb 2008 01:39:48 GMT Nigel Longmire 2008-02-01T01:39:48Z https://community.hpe.com/t5/disk-enclosures/smart-array-641/m-p/4138776#M26076 Hi all,<BR /><BR />Wondering if anyone can tell me if 300GB U320 drives are supported on the 641 (in a ML350 G3) and if so what pre-req's are needed ie firmware versions.<BR /><BR />Cheers<BR /> Fri, 01 Feb 2008 01:39:48 GMT https://community.hpe.com/t5/disk-enclosures/smart-array-641/m-p/4138776#M26076 Nigel Longmire 2008-02-01T01:39:48Z https://community.hpe.com/t5/disk-enclosures/smart-array-641/m-p/4138777#M26077 Hi Nigel,<BR /><BR />Yes they are supported. See the QuickSpecs here:<BR /><BR /><A href="http://h18000.www1.hp.com/products/quickspecs/12067_div/12067_div.html#Compatibility" target="_blank">http://h18000.www1.hp.com/products/quickspecs/12067_div/12067_div.html#Compatibility</A><BR /><BR />If the firmware on a drive is too low, you usually get a warning when the SmartArray starts up...<BR /><BR />Hope this helps,<BR /><BR />Regards,<BR /><BR />Rob Fri, 01 Feb 2008 08:30:09 GMT https://community.hpe.com/t5/disk-enclosures/smart-array-641/m-p/4138777#M26077 Rob Leadbeater 2008-02-01T08:30:09Z