topic command view uninstall in Disk Enclosures

command view uninstall

Jeff Hagstrom — Mon, 03 Mar 2008 15:45:50 GMT

How do I uninstall command view? It's on the machine, but no one ever used it, it's an older version. I want to install the rigth version, but I need to get the old one out. By removing command view, that will not affect anything in the system? It won't bring the drives down or anything?

Re: command view uninstall

Pete Randall — Mon, 03 Mar 2008 15:53:14 GMT

Jeff,

I would have thought you would just install the new version over the old. Why do you say you have to remove first?

Pete

Re: command view uninstall

Jeff Hagstrom — Mon, 03 Mar 2008 15:55:51 GMT

the notes in the command view say to remove any old version of command view first.

Re: command view uninstall

Pete Randall — Mon, 03 Mar 2008 15:58:45 GMT

Jeff,

Upgrading to a Newer Version of Command View SDM:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=lpg35203&jumpid=reg_R1002_USEN

Pete

Re: command view uninstall

Torsten. — Mon, 03 Mar 2008 16:04:15 GMT

Do we talk about commandview sdm (for VA7xxx)?

Depending on what version is installed, you'll need to swremove some packages:

CMDVIEWSDM
HPOVLIC
HPOVSAMDA
HPOVSAMHA
HPOVSAMHB
HPOVSAMJR
HPOVSAMSG
SMI_S_VA
SSLIC

If you select only CMDVIEWSDM, the util will tell you what other software need to be removed too.

It will likely help to safe some information first:

/opt/sanmgr/commandview/server/config/PanConfigParams.txt
/opt/sanmgr/commandview/server/config/ContactInfo.txt
/opt/sanmgr/hostagent/config/access.dat
/opt/sanmgr/hostagent/config/commIpAddr.txt

After swremove, you can delete some directories, if they are no longer in use:

/opt/sanmgr
/etc/opt/sanmgr
/var/opt/sanmgr

Finally, find and install a current version:

1.09.02 for all hp-ux up to 11.23
1.09.03 for 11.31