https://community.hpe.com/t5/disk-enclosures/p800-array-rescan-for-disks/m-p/4156730#M26366 That's what I thought. Too bad! Thanks Fri, 07 Mar 2008 17:24:19 GMT Jeremy Dugas 2008-03-07T17:24:19Z https://community.hpe.com/t5/disk-enclosures/p800-array-rescan-for-disks/m-p/4156728#M26364 Quick questions....<BR /><BR />Is it possible to re-scan for disks, P800 connected to MSA50, without rebooting the connected server? I can see the controller using the HP Array Configuration Utility, BUT there are no disks present. Thu, 06 Mar 2008 17:18:17 GMT https://community.hpe.com/t5/disk-enclosures/p800-array-rescan-for-disks/m-p/4156728#M26364 Jeremy Dugas 2008-03-06T17:18:17Z https://community.hpe.com/t5/disk-enclosures/p800-array-rescan-for-disks/m-p/4156729#M26365 Hi, I quite sure you need to reboot. I was in the same situation with the P800 and an MSA60, but after searching around and reading the manuals I rebooted and everything was ok. Fri, 07 Mar 2008 07:55:16 GMT https://community.hpe.com/t5/disk-enclosures/p800-array-rescan-for-disks/m-p/4156729#M26365 Ronny Horgen 2008-03-07T07:55:16Z https://community.hpe.com/t5/disk-enclosures/p800-array-rescan-for-disks/m-p/4156730#M26366 That's what I thought. Too bad! Thanks Fri, 07 Mar 2008 17:24:19 GMT https://community.hpe.com/t5/disk-enclosures/p800-array-rescan-for-disks/m-p/4156730#M26366 Jeremy Dugas 2008-03-07T17:24:19Z