https://community.hpe.com/t5/disk-enclosures/accelerator-errors/m-p/2573255#M2637 Mike <BR /> <BR />Yes I have. Same issue no resolution and does not seem to creat any issues for the server functionality... <BR /> <BR />Have you found a resolution yet? Thu, 13 Dec 2001 00:00:00 GMT Ayman Altounji 2001-12-13T00:00:00Z https://community.hpe.com/t5/disk-enclosures/accelerator-errors/m-p/2573254#M2636 Has anyone seen problems with the array accelerator showing any errors in Insight Manager EX or with array digs? I currently have 10 ML530 servers installed with net ware 5.0 and 6 of the 10 servers are reporting errors on the accelerator board. They are reporting 2563 read errors and 130 write errors (the same on all 6 servers). I have been working with compaq support but, they have never herd of any other problems like this one. Compaq sent me 2 new 5302/64 array controllers and after installing them and running array digs they reported the same error again with the new controllers. If I move a controller from 1 of the servers not reporting errors into a server that is, the errors go away. Does anyone have any ideas? <BR />Thanks in advance for any comments, <BR />Mike Thu, 30 Aug 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/accelerator-errors/m-p/2573254#M2636 Ayman Altounji 2001-08-30T23:00:00Z https://community.hpe.com/t5/disk-enclosures/accelerator-errors/m-p/2573255#M2637 Mike <BR /> <BR />Yes I have. Same issue no resolution and does not seem to creat any issues for the server functionality... <BR /> <BR />Have you found a resolution yet? Thu, 13 Dec 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/accelerator-errors/m-p/2573255#M2637 Ayman Altounji 2001-12-13T00:00:00Z