topic Re: Smart Array 641 LED possibilities in Disk Enclosures

Smart Array 641 LED possibilities

Tobias Kuhn — Tue, 25 Mar 2008 12:31:36 GMT

Hello all,

is it possible to make a HotPlug HDD LED flashing (or similar) by usage of Array Configuration Utility?
A remote user wants to replace a HotPlug HDD in order to expand the Array (Raid 1+0) and beside telling him the SlotID of the replacement disks, i wonder if there is the possibility to "tell" him by flashing the desired LED. (As far as i know all LEDs are flashing when i use the Array Configuration Utility).

Kind regards

Re: Smart Array 641 LED possibilities

KarloChacon — Wed, 26 Mar 2008 05:32:33 GMT

hi

you known what for example if you have several logical drive and if you select one all those HDDs for that logical drive will flash blue but I have not tried selecting just one HDDs of that logical drive for example selecting physical view and select just one HDD if that only HDD will flash blue

until today I knew about different logical drive if you have more that one but specific HDDs I will need to go to lab and test that

regards