https://community.hpe.com/t5/disk-enclosures/smart-array-641-u160-disabled-critical/m-p/4169923#M26581 In the ADU, I see this message under the controller parameters. We have 3 U320 SCSI drives in the array, and are getting horrible throughput ever since the array had to be rebuilt. We tried going to a local disk to rule out the DAT drive, but even that was slow. I see the controller message but have no idea how to go about changing it, or if this is even the problem.<BR /><BR />How do I up the speed on this? It used to do 300+MB throughput, now highest is low 200's. Fri, 28 Mar 2008 13:21:05 GMT lhosbrough 2008-03-28T13:21:05Z https://community.hpe.com/t5/disk-enclosures/smart-array-641-u160-disabled-critical/m-p/4169923#M26581 In the ADU, I see this message under the controller parameters. We have 3 U320 SCSI drives in the array, and are getting horrible throughput ever since the array had to be rebuilt. We tried going to a local disk to rule out the DAT drive, but even that was slow. I see the controller message but have no idea how to go about changing it, or if this is even the problem.<BR /><BR />How do I up the speed on this? It used to do 300+MB throughput, now highest is low 200's. Fri, 28 Mar 2008 13:21:05 GMT https://community.hpe.com/t5/disk-enclosures/smart-array-641-u160-disabled-critical/m-p/4169923#M26581 lhosbrough 2008-03-28T13:21:05Z