https://community.hpe.com/t5/disk-enclosures/msa1500-cli-commands/m-p/4171187#M26596 No.<BR />Batteries will be enabled once there is write data in cache. <BR /><BR />jk Tue, 01 Apr 2008 02:08:39 GMT John Kufrovich 2008-04-01T02:08:39Z https://community.hpe.com/t5/disk-enclosures/msa1500-cli-commands/m-p/4171186#M26595 Are there CLI commands to enable cache batteries on msa1500's? see attached show THis controller output:<BR /><BR />Cache:<BR /> 0 megabyte read cache 512 megabyte write cache Version 2<BR /> Cache is GOOD, and Cache is enabled.<BR /> No unflushed data in cache<BR /> Batteries are disabled<BR /> Module #1 is fully charged and turned off.<BR /> Module #2 is fully charged and turned off.<BR />Controller Up Time:<BR /> 34 Days 19 Hours 37 Minutes 53 Seconds<BR />Health:<BR /> Surface Scan: Complete.<BR /> Rebuild Status: Complete.<BR /> Expansion: Complete. Tue, 01 Apr 2008 00:19:24 GMT https://community.hpe.com/t5/disk-enclosures/msa1500-cli-commands/m-p/4171186#M26595 daniel pangallo 2008-04-01T00:19:24Z https://community.hpe.com/t5/disk-enclosures/msa1500-cli-commands/m-p/4171187#M26596 No.<BR />Batteries will be enabled once there is write data in cache. <BR /><BR />jk Tue, 01 Apr 2008 02:08:39 GMT https://community.hpe.com/t5/disk-enclosures/msa1500-cli-commands/m-p/4171187#M26596 John Kufrovich 2008-04-01T02:08:39Z