https://community.hpe.com/t5/disk-enclosures/cvsdm-configuration-problems/m-p/4177071#M26696 Check these files and restart the daemons after modification:<BR /><BR />/opt/sanmgr/hostagent/config/access.dat<BR />/opt/sanmgr/hostagent/config/commIpAddr.txt Wed, 09 Apr 2008 17:45:32 GMT Torsten. 2008-04-09T17:45:32Z https://community.hpe.com/t5/disk-enclosures/cvsdm-configuration-problems/m-p/4177070#M26695 Hi Friends, I have a rx1620 and a rx2620 connected to a VA7110,<BR />all the configuration to the Array was done using CVSDM installed on rx2620,<BR />so we moved the rx1620 (ip changed) and the va7110 to a new physical location<BR />and rx2620 was left with internal storage only , well here starts the problem,<BR />rx1620 still "seeing" its LUN's with no problem but when I try to configure (create LUN)<BR />the VA7110 using the CVSDM installed there (rx1620) I am not able to do it <BR />when I run the launcher I am receiving<BR />"error getting database reference from localhost" <BR />and appears the SDM screen with no data, I will appreciate any help...thanks a lot. Wed, 09 Apr 2008 15:21:21 GMT https://community.hpe.com/t5/disk-enclosures/cvsdm-configuration-problems/m-p/4177070#M26695 Emilio Nunez 2008-04-09T15:21:21Z https://community.hpe.com/t5/disk-enclosures/cvsdm-configuration-problems/m-p/4177071#M26696 Check these files and restart the daemons after modification:<BR /><BR />/opt/sanmgr/hostagent/config/access.dat<BR />/opt/sanmgr/hostagent/config/commIpAddr.txt Wed, 09 Apr 2008 17:45:32 GMT https://community.hpe.com/t5/disk-enclosures/cvsdm-configuration-problems/m-p/4177071#M26696 Torsten. 2008-04-09T17:45:32Z