topic MSA60 Cascading Error in Disk Enclosures

MSA60 Cascading Error

AIvanov — Tue, 06 May 2008 10:51:13 GMT

Hi!

I have a problem with an MSA60: after cascading with 2 additional MSA60 enclosures, the Fault LED on the first enclosure turned Amber. Yet, SIM doesn't show any errors. I didn't find any docs on what the Fault LED means.

Did anybody have anything like this?

Thanks a lot!
Anton Ivanov

Re: MSA60 Cascading Error

Shane Pollard - Hallibu — Tue, 13 Jan 2009 21:03:49 GMT

I have the same condition on an MSA-60 we just installed. Did you ever find out a solution to this problem?

Re: MSA60 Cascading Error

AIvanov — Wed, 14 Jan 2009 09:42:27 GMT

No, nobody answered, but the problem still persists. Yet it doesn't interfere with the work of the device.

Re: MSA60 Cascading Error

BRUCE HEIMBIGNER — Fri, 06 Feb 2009 17:21:14 GMT

since you say you 'added' 2 msa60 did you make sure all 3 are at the same firmware level? (and the controller is up to date also)

Re: MSA60 Cascading Error

John Kufrovich — Mon, 09 Feb 2009 02:02:01 GMT

A couple of suggestions.

1). Please update to the latest P800 FW. 5.22FW.

2). If the fans are high speed or you have amber LEDs, please flash the MSA60 controller again.

Regards,
jk