topic Re: add enclosure in Disk Enclosures

add enclosure

dex-mase — Fri, 16 May 2008 15:01:15 GMT

I need to add 2 enclosure to my eva.
is my attachment correct

thank
luigi

Re: add enclosure

Rob Leadbeater — Fri, 16 May 2008 15:40:19 GMT

No idea. Not everyone has visio you know !

Cheers,
Rob

Re: add enclosure

Uwe Zessin — Fri, 16 May 2008 16:08:01 GMT

Looks fine although the HSV controllers take only one EAB port, because they are connected with an Y-cable.

Re: add enclosure

Loïc Bouquet (AA) — Mon, 19 May 2008 07:25:47 GMT

Hello Luigi,
For good configuration, it's recommended to add the new enclosures at bottom of controlers. So at the end, you need to have the controlers with EAB ID 5 and enclosures with ID 1 to 4.
Therefor, the loop cabling is good.

Re: add enclosure

IBaltay — Mon, 19 May 2008 09:19:47 GMT

Hi, your cable connection diagram is correct for both loops (loop A and loop B)

Re: add enclosure

IBaltay — Mon, 19 May 2008 09:43:51 GMT

Hi,
additionaly, to be sure that you are correct also in the enclosure address bus connection i am sending you the picture