https://community.hpe.com/t5/disk-enclosures/fc10-array-event-notification-101/m-p/4212381#M27314 I have a rp5470 and received the attached notification. An ioscan list path 0/12/0/0.8.0.255.0.10 for tgt and sctl as NO_HW<BR />Attached is the STM log. I am not sure if I am having a problem with the controller or the gbics. Fri, 06 Jun 2008 21:27:29 GMT al-niz 2008-06-06T21:27:29Z https://community.hpe.com/t5/disk-enclosures/fc10-array-event-notification-101/m-p/4212381#M27314 I have a rp5470 and received the attached notification. An ioscan list path 0/12/0/0.8.0.255.0.10 for tgt and sctl as NO_HW<BR />Attached is the STM log. I am not sure if I am having a problem with the controller or the gbics. Fri, 06 Jun 2008 21:27:29 GMT https://community.hpe.com/t5/disk-enclosures/fc10-array-event-notification-101/m-p/4212381#M27314 al-niz 2008-06-06T21:27:29Z https://community.hpe.com/t5/disk-enclosures/fc10-array-event-notification-101/m-p/4212382#M27315 See<BR /><BR /><A href="http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1238739" target="_blank">http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1238739</A><BR /><BR />Both chassis controllers are OK, ctrl B has lost the link - so it could be the gbic, the cable or even the HBA.<BR /><BR /><BR />Your diagnostic version is from march 2002! Sat, 07 Jun 2008 04:38:56 GMT https://community.hpe.com/t5/disk-enclosures/fc10-array-event-notification-101/m-p/4212382#M27315 Torsten. 2008-06-07T04:38:56Z