https://community.hpe.com/t5/disk-enclosures/scripted-eva-shutdown/m-p/4256981#M28259 1. It should do, although I have seen software/hardware combinations that did not power off the batteries, even if they were told via Command View. But you need to test the script in your environment anway, don't you?<BR />Let us know about the result.<BR /><BR />2. Sure. SSSU just talks to the Command View EVA agent which then talks to the EVA controller. Mon, 25 Aug 2008 07:51:58 GMT Uwe Zessin 2008-08-25T07:51:58Z https://community.hpe.com/t5/disk-enclosures/scripted-eva-shutdown/m-p/4256980#M28258 Hi,<BR /><BR />I found the following thread on ITRC regarding scripted EVA shutdown:<BR /><BR /><A href="http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1219641174244+28353475&amp;threadId=1163266" target="_blank">http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1219641174244+28353475&amp;threadId=1163266</A><BR /><BR />I have two additional questions:<BR /><BR />1. Will doing shutdown as described in the thread also power-off the batteries on the EVA?<BR /><BR />2. Is the scripted shutdown procedure supported for all models of EVA, i.e., 4000, 5000 etc?<BR /><BR />Thanks,<BR />Onong Mon, 25 Aug 2008 04:47:48 GMT https://community.hpe.com/t5/disk-enclosures/scripted-eva-shutdown/m-p/4256980#M28258 Onong 2008-08-25T04:47:48Z https://community.hpe.com/t5/disk-enclosures/scripted-eva-shutdown/m-p/4256981#M28259 1. It should do, although I have seen software/hardware combinations that did not power off the batteries, even if they were told via Command View. But you need to test the script in your environment anway, don't you?<BR />Let us know about the result.<BR /><BR />2. Sure. SSSU just talks to the Command View EVA agent which then talks to the EVA controller. Mon, 25 Aug 2008 07:51:58 GMT https://community.hpe.com/t5/disk-enclosures/scripted-eva-shutdown/m-p/4256981#M28259 Uwe Zessin 2008-08-25T07:51:58Z