https://community.hpe.com/t5/disk-enclosures/redundant-controller-active/m-p/4257667#M28263 This is in a MSA1000?<BR /><BR />It just means that the standby controller has become active. This is in response to some event on the SAN or the failure of the other controller. You need to investigate a little what happened. Tue, 26 Aug 2008 07:57:03 GMT Víctor Cespón 2008-08-26T07:57:03Z https://community.hpe.com/t5/disk-enclosures/redundant-controller-active/m-p/4257666#M28262 A 'Redundant Controller Active' trap signifies that the Storage Agent has detected that a backup array controller in a duplexed pair has switched over to the active role.<BR /><BR />Details:<BR />Controller Role 'Active'<BR />Chassis Name 'SGM06XXXX'<BR />Slot # 1<BR />MEMORY 256<BR />Model 3<BR />Serial Number 'PB9840KXXXXX'<BR /><BR />Hi this alert generated on server and if this is a error what is the solution for this.<BR /><BR />Thamk you<BR /><BR /> Tue, 26 Aug 2008 05:06:12 GMT https://community.hpe.com/t5/disk-enclosures/redundant-controller-active/m-p/4257666#M28262 Kirti 2008-08-26T05:06:12Z https://community.hpe.com/t5/disk-enclosures/redundant-controller-active/m-p/4257667#M28263 This is in a MSA1000?<BR /><BR />It just means that the standby controller has become active. This is in response to some event on the SAN or the failure of the other controller. You need to investigate a little what happened. Tue, 26 Aug 2008 07:57:03 GMT https://community.hpe.com/t5/disk-enclosures/redundant-controller-active/m-p/4257667#M28263 Víctor Cespón 2008-08-26T07:57:03Z