topic Cant start Comman View EVA 8.0 in Disk Enclosures

Cant start Comman View EVA 8.0

Litsov — Wed, 17 Sep 2008 06:22:39 GMT

I have Windows 2003 Server R2 32x sp2 as SMA.
IE 6.0.
I have succesfully installed CV 8.0 and add user account to appropriate group.
Then, whet I try to start CV, enter username and password, I see only bare frames without content, the application loading progress bar.
But when I run CV through network from the other machine, for exampe on my notebook with VISTA and IE 7.0 every thing is work fine.

So what I must do, so that CV work on SMA, thanks?

Re: Cant start Comman View EVA 8.0

Rob Leadbeater — Wed, 17 Sep 2008 06:26:18 GMT

Hi,

Try clearing the cache in IE, and the Java cache on your SMA.

That will probably get things going.

You might also need to clear the SSL state. (Tools -> Internet Options -> Content -> Clear SSL State.)

Hope this helps,

Regards,

Rob

Re: Cant start Comman View EVA 8.0

Litsov — Wed, 17 Sep 2008 06:41:21 GMT

I think that nothing to clear, because I try this on 2 clear Windows installed servers.

Re: Cant start Comman View EVA 8.0

Steven Clementi — Wed, 17 Sep 2008 12:33:52 GMT

Are you trying to access CV from the local console? or from across the network?

If from the local console, try from another machine. Simply replace "localhost" with the IP address of the machine running CV...

https://localhost:2381/command_view_eva would then be...

https://192.168.1.1:2381/command_view_eva

(or whatever the url is).

See if you get the same result.

Steven

Re: Cant start Comman View EVA 8.0

Litsov — Wed, 17 Sep 2008 20:35:04 GMT

The problem solves.
When I do startup I have used customer flash drive to transfer CV8.0 installation files from my note to server.
This flash drive was infected some viruses, which modify IE behavior. So that was the reason, after installation antivirus software the problem was gone.
Thank all, that was the stupid mistake.