https://community.hpe.com/t5/disk-enclosures/va7410-on-mpe/m-p/4293869#M29068 Did you adjust host_port_behavior to MPE? Fri, 25 Jun 2010 10:27:26 GMT Torsten. 2010-06-25T10:27:26Z https://community.hpe.com/t5/disk-enclosures/va7410-on-mpe/m-p/4293867#M29066 MPE system<BR />My VA array <BR />Direct Attach OS - MPE on ALL controllers<BR />I was able to configure 15 luns but the OS would only recognize 8 - for some reason<BR />After messing around with the configuration - now the OS is only able to see lun0<BR />I have no idea how I got in this predicament<BR />Can someone provide some clues ??<BR /> Fri, 24 Oct 2008 17:55:34 GMT https://community.hpe.com/t5/disk-enclosures/va7410-on-mpe/m-p/4293867#M29066 IT Response 2008-10-24T17:55:34Z https://community.hpe.com/t5/disk-enclosures/va7410-on-mpe/m-p/4293868#M29067 Hi - just wondered how you got in with this one. We are about to attach a VA7410 to an HPe3000 N4000 server. We have read that you can only have 8 luns, but does this mean in 8 in total or 8 down each fibre channel. Any tips you can give me on best performance configuration for a VA7410 with MPE?<BR /><BR />Many thanks in advance. Thu, 24 Jun 2010 13:16:31 GMT https://community.hpe.com/t5/disk-enclosures/va7410-on-mpe/m-p/4293868#M29067 Marcus France 2010-06-24T13:16:31Z https://community.hpe.com/t5/disk-enclosures/va7410-on-mpe/m-p/4293869#M29068 Did you adjust host_port_behavior to MPE? Fri, 25 Jun 2010 10:27:26 GMT https://community.hpe.com/t5/disk-enclosures/va7410-on-mpe/m-p/4293869#M29068 Torsten. 2010-06-25T10:27:26Z