topic Re: Command View 8.2 in Disk Enclosures

Command View 8.2

jdimitrov — Thu, 06 Nov 2008 10:20:07 GMT

I want to update Command View v6.0 to v8.2 because i will update EVA6000 XSC v.6 to v.6,200, but i don't now is the license the same like CV v.6.0, and if not how can update it fot version CV 8.0.
I was download CV 8.0 and patch for 8.2, but i want to be sure when i install the new software, it will work fine

Re: Command View 8.2

IBaltay — Thu, 06 Nov 2008 10:28:44 GMT

Hi,
this thread could help you:
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1283948

Re: Command View 8.2

patbourdon — Fri, 07 Nov 2008 18:13:11 GMT

no... you can't update cause you have to uninstall cv6 before installing cv8 and you have to upgrade your CV licences too...

bad luck :)

Re: Command View 8.2

jdimitrov — Tue, 11 Nov 2008 15:46:06 GMT

how can upgrade my CV licences for ver.8.02
thanks in advance

Re: Command View 8.2

Steven Clementi — Tue, 11 Nov 2008 15:53:28 GMT

Visit the site... www.webware.hp.com

From there, you can click on he "Migrate" button. If you have valid/supported licenses, than you should be able to run through the web form and get your new licenses.

Keep in mind that Command View 8 comes with a 60 day "Instant-On" license. This means you can use all features of your EVA('s) for 60 days from the install date without needing a license. After that, you will not be able to do certain things on the EVA unless you have a valid license. (Add disks to a group, manage Virtual disks, etc.) The EVA will continue to run without a problem.

Steven