https://community.hpe.com/t5/disk-enclosures/compaq-array-configuration-only-see-my-array-from-cd-and-not-in/m-p/2589456#M2918 I have installed a new controller 3200 and external array, <BR />I booted up from Smartstart CD no problems, array was picked up when running array cfg util, I configured array and saved settings as i always have. rebooted server, ran array cfg util from Windows NT and the controller is not listed. HELP <BR />I have done this 20 times this year and this is teh first time this has happened Wed, 03 Oct 2001 23:00:00 GMT Ayman Altounji 2001-10-03T23:00:00Z https://community.hpe.com/t5/disk-enclosures/compaq-array-configuration-only-see-my-array-from-cd-and-not-in/m-p/2589456#M2918 I have installed a new controller 3200 and external array, <BR />I booted up from Smartstart CD no problems, array was picked up when running array cfg util, I configured array and saved settings as i always have. rebooted server, ran array cfg util from Windows NT and the controller is not listed. HELP <BR />I have done this 20 times this year and this is teh first time this has happened Wed, 03 Oct 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/compaq-array-configuration-only-see-my-array-from-cd-and-not-in/m-p/2589456#M2918 Ayman Altounji 2001-10-03T23:00:00Z https://community.hpe.com/t5/disk-enclosures/compaq-array-configuration-only-see-my-array-from-cd-and-not-in/m-p/2589457#M2919 which version of cpqacu are you using? Thu, 04 Oct 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/compaq-array-configuration-only-see-my-array-from-cd-and-not-in/m-p/2589457#M2919 Ayman Altounji 2001-10-04T23:00:00Z