https://community.hpe.com/t5/disk-enclosures/msa-1510i-second-controller-doesn-t-boot/m-p/4348394#M29978 We got last month a second controller for our old MSA1510i. We powered down the whole stuff, added the new controller, the new iSCSI interface and a new backend SCSI interface in the places mentionned in the Configuration guide.<BR />Then we started the MSA, the first controller was booting without any problems. The second controller is showing the LCD version, the four LED´s on right lower are showing up and then the top left LED is green and thats it. Nothing more.<BR />The firmware on the older first controlelr is 1.32.202 adn seems to work allright. We have attached a single-ended MSA20 with 12 500 GB SATA harddisks in it.<BR /><BR />Is the new controller failed or are we mssing some point? Fri, 30 Jan 2009 12:45:25 GMT ZEHETAL 2009-01-30T12:45:25Z https://community.hpe.com/t5/disk-enclosures/msa-1510i-second-controller-doesn-t-boot/m-p/4348394#M29978 We got last month a second controller for our old MSA1510i. We powered down the whole stuff, added the new controller, the new iSCSI interface and a new backend SCSI interface in the places mentionned in the Configuration guide.<BR />Then we started the MSA, the first controller was booting without any problems. The second controller is showing the LCD version, the four LED´s on right lower are showing up and then the top left LED is green and thats it. Nothing more.<BR />The firmware on the older first controlelr is 1.32.202 adn seems to work allright. We have attached a single-ended MSA20 with 12 500 GB SATA harddisks in it.<BR /><BR />Is the new controller failed or are we mssing some point? Fri, 30 Jan 2009 12:45:25 GMT https://community.hpe.com/t5/disk-enclosures/msa-1510i-second-controller-doesn-t-boot/m-p/4348394#M29978 ZEHETAL 2009-01-30T12:45:25Z