https://community.hpe.com/t5/disk-enclosures/quot-breaking-quot-a-drive-array/m-p/2454060#M303 Hi Jeff<BR /><BR />if you want to use the disks individually but still connected to the NetRAID , first of all you must delete the array.<BR />Once you deleted the array as I explained in the other message, you can create 3 array made by one disk and configure each new array as RAID 0. So you will have a LD per each disk.<BR /><BR />Another option is to connect the 3 disk to a standard SCSI controller instead of the NetRAID card.<BR /><BR />Franco<BR />Bye<BR /> Tue, 17 Oct 2000 11:02:32 GMT Franco Cenati 2000-10-17T11:02:32Z https://community.hpe.com/t5/disk-enclosures/quot-breaking-quot-a-drive-array/m-p/2454059#M302 I need to "break" a RAID 5 drive array that is currently in place, but not being used. I want to be able to address each drive individually. I tried doing the reconfiguration option, but that only seems to have changed the array from RAID 5 to RAID 0 Mon, 16 Oct 2000 14:17:31 GMT https://community.hpe.com/t5/disk-enclosures/quot-breaking-quot-a-drive-array/m-p/2454059#M302 Jeff Scheffler 2000-10-16T14:17:31Z https://community.hpe.com/t5/disk-enclosures/quot-breaking-quot-a-drive-array/m-p/2454060#M303 Hi Jeff<BR /><BR />if you want to use the disks individually but still connected to the NetRAID , first of all you must delete the array.<BR />Once you deleted the array as I explained in the other message, you can create 3 array made by one disk and configure each new array as RAID 0. So you will have a LD per each disk.<BR /><BR />Another option is to connect the 3 disk to a standard SCSI controller instead of the NetRAID card.<BR /><BR />Franco<BR />Bye<BR /> Tue, 17 Oct 2000 11:02:32 GMT https://community.hpe.com/t5/disk-enclosures/quot-breaking-quot-a-drive-array/m-p/2454060#M303 Franco Cenati 2000-10-17T11:02:32Z