https://community.hpe.com/t5/disk-enclosures/cpqarray-reports-fan-failure/m-p/2597701#M3031 I get the message that the "Compaq Array Controller in slot 3 has detected a fan failure in the storage enclosure on port 2" This is followed by another message immediately reporting a fully operational state. The fan has been changed to no avail. There is no diserable change in the fan noise or function. I have applied SP17866 also to no avail. What steps do I take now? <BR />Thanks Thu, 18 Oct 2001 23:00:00 GMT Ayman Altounji 2001-10-18T23:00:00Z https://community.hpe.com/t5/disk-enclosures/cpqarray-reports-fan-failure/m-p/2597701#M3031 I get the message that the "Compaq Array Controller in slot 3 has detected a fan failure in the storage enclosure on port 2" This is followed by another message immediately reporting a fully operational state. The fan has been changed to no avail. There is no diserable change in the fan noise or function. I have applied SP17866 also to no avail. What steps do I take now? <BR />Thanks Thu, 18 Oct 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/cpqarray-reports-fan-failure/m-p/2597701#M3031 Ayman Altounji 2001-10-18T23:00:00Z