topic Re: Command View 8.1 + ISEE + Backup Exec 12 on same Server in Disk Enclosures

Command View 8.1 + ISEE + Backup Exec 12 on same Server

Maxitaly_1 — Wed, 25 Feb 2009 07:56:23 GMT

Hi all

I need to install on the same physical server (connected to a SAN / EVA 4400) Command View 8.1 + ISEE and Backup Exec 12. Backup Exec is using a MSL6030 Library on FC connection.
Reading the installation guides and release notes of the products I haven't found compatibility problems.

Anyone tried this configuration ?

Thanks a lot in advance.
Max

Re: Command View 8.1 + ISEE + Backup Exec 12 on same Server

Víctor Cespón — Wed, 25 Feb 2009 08:11:58 GMT

Command View 8.1 is installed on the EVA4400 management module, not on the Windows server. Command View for Windows is still on version 8.02.

Also, IEEE is on it's way to retirement in june, install Insight Remote Support, it's easier and works better.

A backup software should not cause problems with Command View, the only incompatibility I know about is HP Storage Essentials.

Re: Command View 8.1 + ISEE + Backup Exec 12 on same Server

Maxitaly_1 — Wed, 25 Feb 2009 08:45:29 GMT

Many thanks !
Max