https://community.hpe.com/t5/disk-enclosures/operating-in-interim-recovery-mode/m-p/2597711#M3032 Interim Recovery mode, waiting for ID 4 to be replaced. No matter what drive I stick in there, it's instantly switched to failed state. The replacement drives are good. I can move them to another machine and create an array and all is good. Why can't I get the 2P to accept it's replacement drive?!?!! Thu, 18 Oct 2001 23:00:00 GMT Ayman Altounji 2001-10-18T23:00:00Z https://community.hpe.com/t5/disk-enclosures/operating-in-interim-recovery-mode/m-p/2597711#M3032 Interim Recovery mode, waiting for ID 4 to be replaced. No matter what drive I stick in there, it's instantly switched to failed state. The replacement drives are good. I can move them to another machine and create an array and all is good. Why can't I get the 2P to accept it's replacement drive?!?!! Thu, 18 Oct 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/operating-in-interim-recovery-mode/m-p/2597711#M3032 Ayman Altounji 2001-10-18T23:00:00Z https://community.hpe.com/t5/disk-enclosures/operating-in-interim-recovery-mode/m-p/2597712#M3033 Did you every determine the fix for this? I have exactly the same situation. <BR /> <BR />Thanks for any info you can provide. <BR /> <BR />Vance Williams <BR />williams@matec.org Sun, 12 May 2002 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/operating-in-interim-recovery-mode/m-p/2597712#M3033 Ayman Altounji 2002-05-12T23:00:00Z