https://community.hpe.com/t5/disk-enclosures/msa30-question/m-p/4371740#M30455 The M4354 is a dual-bus SCSI enclosure and does not contain a SCSI (RAID) controller. I would not move arbitrary modules because there are dependencies on the I/O module and the EMU module. You can put the disk drives in a MSA30 DB, though. Wed, 04 Mar 2009 18:49:47 GMT Uwe Zessin 2009-03-04T18:49:47Z https://community.hpe.com/t5/disk-enclosures/msa30-question/m-p/4371739#M30454 In case of a hardware failure, can an MSA30 disk unit replace a StorageWorks 4354r disk unit? For instance, can we swap the SCSI controller and disks from a 4354r and put them in a MSA30 and have it come up seamlessly and not lose any data? Wed, 04 Mar 2009 18:39:37 GMT https://community.hpe.com/t5/disk-enclosures/msa30-question/m-p/4371739#M30454 bsuprai 2009-03-04T18:39:37Z https://community.hpe.com/t5/disk-enclosures/msa30-question/m-p/4371740#M30455 The M4354 is a dual-bus SCSI enclosure and does not contain a SCSI (RAID) controller. I would not move arbitrary modules because there are dependencies on the I/O module and the EMU module. You can put the disk drives in a MSA30 DB, though. Wed, 04 Mar 2009 18:49:47 GMT https://community.hpe.com/t5/disk-enclosures/msa30-question/m-p/4371740#M30455 Uwe Zessin 2009-03-04T18:49:47Z