https://community.hpe.com/t5/disk-enclosures/raid-1-0-10/m-p/2599241#M3060 I recently spoke with a Compaq engineer that informed me Compaq's documentation (until just recently) refered to 1+0 as 0+1...So, anywhere they say 0+1, they are actually meaning RAID 10... Mon, 05 Nov 2001 00:00:00 GMT Ayman Altounji 2001-11-05T00:00:00Z https://community.hpe.com/t5/disk-enclosures/raid-1-0-10/m-p/2599240#M3059 Do any Compaq array controllers support Raid 1+0 (Raid 10) <BR />They all seem to support Raid 0+1. <BR /> <BR />The QuickSPecs for the integrated 5i controller in the ML370G2 says RAID 1+0 support. Is this an error? Should it say RAID 0+1? <BR /> <BR />Thanks in advance Mon, 22 Oct 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/raid-1-0-10/m-p/2599240#M3059 Ayman Altounji 2001-10-22T23:00:00Z https://community.hpe.com/t5/disk-enclosures/raid-1-0-10/m-p/2599241#M3060 I recently spoke with a Compaq engineer that informed me Compaq's documentation (until just recently) refered to 1+0 as 0+1...So, anywhere they say 0+1, they are actually meaning RAID 10... Mon, 05 Nov 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/raid-1-0-10/m-p/2599241#M3060 Ayman Altounji 2001-11-05T00:00:00Z