topic Continuos Access EVA4400 Status Code 201 in Disk Enclosures https://community.hpe.com/t5/disk-enclosures/continuos-access-eva4400-status-code-201/m-p/4390495#M30758 Good, I have two EVAS 4400 (EVA1 and EVA2), the problem I have is that since one of them let me do Continuous Access. <BR /><BR />I believe in a Group GR Data Replication for me cree EVA1 to a replica of a LUN in EVA2 and do it properly. <BR /><BR />The problem comes when you then attempt to perform the same for the other EVA, from EVA2 to EVA1. Gives me the following error: <BR /><BR /> <BR />Operation failed! <BR />Status code: 201 <BR /><BR />The EVA1 have these caracterísricas: <BR />System <BR />Type: HSV300 <BR />Version: 09004000 <BR />Software: CR11EFlep-09004000 <BR /><BR />The EVA2 have these caracterísricas: <BR />System <BR />Type: HSV300 <BR />Version: 09006000 <BR />Software: CR1276lep-09006000 <BR /><BR />I can show I'm doing something wrong or something. Mon, 30 Mar 2009 13:43:02 GMT JuanCG 2009-03-30T13:43:02Z Continuos Access EVA4400 Status Code 201 https://community.hpe.com/t5/disk-enclosures/continuos-access-eva4400-status-code-201/m-p/4390495#M30758 Good, I have two EVAS 4400 (EVA1 and EVA2), the problem I have is that since one of them let me do Continuous Access. <BR /><BR />I believe in a Group GR Data Replication for me cree EVA1 to a replica of a LUN in EVA2 and do it properly. <BR /><BR />The problem comes when you then attempt to perform the same for the other EVA, from EVA2 to EVA1. Gives me the following error: <BR /><BR /> <BR />Operation failed! <BR />Status code: 201 <BR /><BR />The EVA1 have these caracterísricas: <BR />System <BR />Type: HSV300 <BR />Version: 09004000 <BR />Software: CR11EFlep-09004000 <BR /><BR />The EVA2 have these caracterísricas: <BR />System <BR />Type: HSV300 <BR />Version: 09006000 <BR />Software: CR1276lep-09006000 <BR /><BR />I can show I'm doing something wrong or something. Mon, 30 Mar 2009 13:43:02 GMT https://community.hpe.com/t5/disk-enclosures/continuos-access-eva4400-status-code-201/m-p/4390495#M30758 JuanCG 2009-03-30T13:43:02Z Re: Continuos Access EVA4400 Status Code 201 https://community.hpe.com/t5/disk-enclosures/continuos-access-eva4400-status-code-201/m-p/4390496#M30759 The problem could be caused by having different firmware versions on each array.<BR /><BR />CR11EFlep-09004000 <BR />CR1276lep-09006000 Tue, 31 Mar 2009 16:14:04 GMT https://community.hpe.com/t5/disk-enclosures/continuos-access-eva4400-status-code-201/m-p/4390496#M30759 Pounds 2009-03-31T16:14:04Z