topic Re: Configuration MSA2000 in Disk Enclosures

Configuration MSA2000

Rene Claassen — Thu, 23 Apr 2009 09:16:05 GMT

Hi

Can somebody tell me how to backup the configuration of a MSA2000.

I cann't find this option in the GUI or CLI.

Thx in advance

Rene

Re: Configuration MSA2000

Sivakumar MJ._1 — Thu, 23 Apr 2009 13:36:30 GMT

Rene.

Manage
> Utilities
> Configuration Utilities
> Save Config File

Re: Configuration MSA2000

Rene Claassen — Thu, 23 Apr 2009 14:06:39 GMT

Thx, But i haven't a tab manage. So this is not the solution.

It's an MSA 2312fc with firmware m100r18.

Thx

Rene

Re: Configuration MSA2000

divakar.k — Thu, 23 Apr 2009 22:11:34 GMT

Once you login to the SMU, On the left side you find a section "Manage" it is not a tab as such.

Once you click on manage it will prompt you for user name & password, if you have logged in as monitor user

Hope this helps

Re: Configuration MSA2000

Rene Claassen — Mon, 27 Apr 2009 13:56:09 GMT

Hi,

I've attached a screen dump. I cann't find te manage thing.

I think this is an other version of the MSA you refer to.

This is an MSA2312fc with fw M100R18

Thx in advance

Re: Configuration MSA2000

Kranti Mahmud — Tue, 28 Apr 2009 09:43:35 GMT

Hi Rene,

how to backup the configuration of a MSA2000--> you can controller A with the ip address 10.0.0.2 and controller B with 10.0.0.3. The subnetmask is 255.255.255.0. You can connect the controller with a serial connection and the parameters 115200 baud, 8 data bits, no parity, 1 stop bit and no flow control. After connecting to the serial CLI you can execute the command: show_tech_support

The output can saved as the backup of MSA configuration.

Rgds-Kranti

Re: Configuration MSA2000

Johnny von Heimerall — Tue, 07 Jul 2009 19:16:39 GMT

Hi All,

The first reply is for MSA2000 G1 and "show tech_support" is for MSA1x00.

Now, for the G2, i couldnt find any easy command as for the G1. So insead i would recommend saving output from CLI.
Just telnet in to one of the controllers and save the output recommended here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01797449〈=en&cc=us&taskId=101&prodSeriesId=3687115&prodTypeId=12169

Best regards,
Johnny

Re: Configuration MSA2000

Aaron Rosillo Silva — Fri, 03 Sep 2010 15:40:20 GMT

Hi All.

Does anybody known the default user and password to configure a MSA2000? thru the ip 10.0.0.2.

Regards.

Re: Configuration MSA2000

Johan Guldmyr — Sat, 04 Sep 2010 09:11:00 GMT

something with "manage" I recall.. maybe this ought to be a new thread?

Re: Configuration MSA2000

Johnny von Heimerall — Sat, 04 Sep 2010 13:21:13 GMT

The default password is " !manage "
-without the quotation marks.

Please use the search function or create a new thread next time to keep in topic.