https://community.hpe.com/t5/disk-enclosures/iscsi-mpx-manager/m-p/4437165#M31442 Nobody seems to know which password is set on the mpx manager gui, and therefor I cannot remove initiators. Is it possible to reinstall the gui and set a new password without his affecting the producion?<BR /><BR />-inex<BR /> Thu, 11 Jun 2009 05:23:37 GMT inex 2009-06-11T05:23:37Z https://community.hpe.com/t5/disk-enclosures/iscsi-mpx-manager/m-p/4437165#M31442 Nobody seems to know which password is set on the mpx manager gui, and therefor I cannot remove initiators. Is it possible to reinstall the gui and set a new password without his affecting the producion?<BR /><BR />-inex<BR /> Thu, 11 Jun 2009 05:23:37 GMT https://community.hpe.com/t5/disk-enclosures/iscsi-mpx-manager/m-p/4437165#M31442 inex 2009-06-11T05:23:37Z https://community.hpe.com/t5/disk-enclosures/iscsi-mpx-manager/m-p/4437166#M31443 hi,<BR /><BR /> the default password and resetting it are in the user guide :-<BR /><BR /><A href="http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01150267/c01150267.pdf?jumpid=reg_R1002_USEN" target="_blank">http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01150267/c01150267.pdf?jumpid=reg_R1002_USEN</A><BR /><BR /> all the functions in the gui can be done on the command line too.<BR /><BR />hth<BR /><BR /> Thu, 11 Jun 2009 07:26:49 GMT https://community.hpe.com/t5/disk-enclosures/iscsi-mpx-manager/m-p/4437166#M31443 marsh_1 2009-06-11T07:26:49Z